Hundkoja.com

After fitting a set of radias arm brackets , i need a complete hjulinställning (castor, camber, toe). I contacted a few, and no one can do it with 10" wheels.

needs to be malmö, as the rear tracking is way out.

Any suggestions?

Hej.
Jag har 13" på min koja så kanske lite lättare för mig. Jag åker alltid till Däckalasse med mina bilar. Staffanstorp mellan Malmö och Lund.

http://www.dackalasse.se/

Ring och fråga

Hälsningar
Patrik

Kollat med Mekonomen? gjorde min där, i och för sig i Kristianstad men det borde väl gå hos er också tycker jag..

No luck today at all!

Mekonomen - NO
Vianor - NO
DACKia - NO
Kennets Däck - in 3 weeks
Ringtjänst i Arlöv - 2 weeks
Lasse in Staffanstorp - NO
CityDäck malmö - Spent an hour there but could do the rear!

Finally!

Spent almost 3 hours at Ringtjänst in Arlov this afternoon.

Had trouble adjusting the minisport camber brackets, nit the best design in the world.

All set up!

Fram -
Camber -1.5
Caster 3.5 exact on both sides
Toe -0.36

Bak
Camber -0.4
Toe 0.32

Drives beutifully

Har alltid fått modifiera dem kraftigt. ( vilket inte är ovanligt med "for race use only" delar. Tillgång till svets och roterande fil underlättar
Men det blir nog bra med de inställningarna. Men jag skulle nog justera toe bak mer mot 0

Really, I have always thought that the rear must have some positive toe (between 0.22 - 0.45)?

Actually I didn't think the brackets where to bad strength wise, definitely comparable to the original. And they fitted first time, no modification needed.

Though the way they adjust a real bad design. They use a serrated plate up and down camber / left and right toe.

I am not sure we did it right, but we had to have the car in the air to be able to adjust the rear, so this meant that the droop of the suspension affected the settings. lots of trial and error.

Blir nog bra !